SATO M-5900RV Operator And Technical Reference Manual page 49

Advanced Mode
Calendar Set
calendar enabled
no
STEP
1.
2.
3.
4.
5.
6.
PN 9001081
Rev.C
yes
PROCEDURE
Year: The first display shown will have the two digit year selection
underlinded. Press the LINE key to scroll through the dates. The year
number will increase by one value each time the LINE key is pressed.
Month: After you have set the correct year, press the .EED key to
advance the underline cursor to the two digit Month position. Press
the LINE key to scroll through the numbers corresponding to the
month. The month number will increase by one value each time the
LINE key is pressed.
Day: After you have set the correct month, press the .EED key to
advance the underline cursor to the two digit Day position. Press the
LINE key to scroll through the numbers corresponding to the date.
The date number will increazse by one value each time the LINE key
is pressed.
Hour: After you have set the correct date, press the .EED key to
advance the underline cursor to the two digit Hour position. Press the
LINE key to scroll through the numbers corresponding to the hour
(using a 24 hour clock). The hour number will increase by one value
each time the LINE key is pressed.
Minute: After you have set the correct hour, press the .EED key to
advance the underline cursor to the two digit minute position. Press
the LINE key to scroll through the numbers corresponding to the
minute. The minute number will increase by one value each time the
LINE key is pressed.
After you have set the calendar, press the .EED key to accept the
setting and advance to the next display.
SATO M-5900RV Operator and Technical Reference Manual
Section 2. Installation and Configuration
Calendar
Feed
00/00/00
Key
00:00
Page 2-33