Table of Contents
Advertisement
3 Initial Operation
Packing Contents
EN
Packing Contents Sagem Primo Voice
‚ Device
ƒ Telephone handset
„ Spiral cable for telephone handset
... Paper tray
† Mains cable with plug (country-specific)
‡ Telephone cable with plug (country-specific)
ˆ Additional document support
User Manual
User manual with installation guide (not depicted)
Verpackungsinhalt
Missing Package Contents
Notice
Missing Package Contents
If one of the parts is missing or damaged, please
contact your retailer or our customer service.
Opening the Cover
Opening the Cover
Pull down the cover for paper and document feeder behind
the panel.
Geräteklappe öffnen
8
Attaching Paper Tray
Attaching Paper Tray
If you just want to insert paper temporarily, fold the paper
support in the cover up (A). You can remove the paper
after receiving fax or copying and close the cover again.
If you constantly require paper in the device, insert the
paper tray in the opening provided for it behind the paper
feed (B).
Papierhalter installieren
Loading Paper
Paper Format
Before you can receive documents or make copies, you
must load paper into the device. Please use only appropri-
ate paper in standard format A4 (210 × 297 millimetre ·
2
preferably 80 g/m
). Follow the specifications in the tech-
nical data.
Loading Paper
Notice
Loading Paper
Separate the paper sheets by fanning them out,
then align them by tapping edge of the stack
lightly against a flat surface. This will prevent
several sheets of paper from being drawn in all at
once.
Preparing Paper
Loading Paper Sagem
1 Fold open the lever on the right beside the paper feed
towards front.
2 Insert paper in the paper feeder. You can use the paper
support in the cover to load up to 15 sheets (A4 · 80
g/m²). In the paper tray you can insert maximum 50
sheets (A4 · 80 g/m2).
Sagem · SPFX 43 · 47 · SP 4840
Advertisement
Table of Contents
