Netlink Svp-Ii System - Avaya 3600 Series Installation Instructions Manual

4.5.1 NetLink SVP-II System

When you connect via the serial port for the first time the following main menu is displayed. Once a name for the AVPP
has been entered, on subsequent accesses a screen confirming the name and IP address of the unit is displayed until
Enter is pressed.
System Status
· 71
Menu for viewing error messages, status of operation and software code version. You can check the version currently
installed on AVPP through the System Status menu, see
SVP-II Configuration
·
Allows you to set the mode and reset the system.
QoS Configuration
·
This sub-menu of the SVP-II Configuration menu is used to alter the QoS settings applied to different signals.
Network Configuration
·
Allows you to set network configuration options, including IP address and hostname.
Change Password
·
Allows you to change the password for AVPP access.
3600 Series Phone Installation
IP Office
62
64
65
66
Maintenance and Administration: Using the AVPP Menus
Software Versions .
71
15-601082 Issue 06a (21 February 2014)
Page 61