Corded Buttonholes With Presser Foot No. 3C (Optional Accessory); Corded Buttonholes With Buttonhole Foot No. 3A - Bernina 820 Owner's Manual

corded Buttonholes With presser
foot no. 3c
► insert the needle at the beginning of the buttonhole
► raise the presser foot
► hook the cord over the center pin on the front of the foot
► place both ends of the cord in the grooves on the sole of
the foot and pull them to the back
► lower the presser foot
Sewing
► sew the buttonhole in the usual manner, do not hold the
cord tightly
► the buttonhole will form over the cord, covering it
corded Buttonholes With Buttonhole
foot no. 3a
► insert the needle at the beginning of the buttonhole
► raise the presser foot
► guide the cord under the foot to the right
► hook the cord over the pin at the back of the foot
► bring the cords to the front of the foot
► pull them into the slit
Sewing
► sew the buttonhole in the usual manner, do not hold the
cord tightly
► the buttonhole will form over the cord, covering it
Narrowing bead width could affect coverage
of cording.
032298.53.04_1204_B820_EN
(optional accessory)
101