Table of Contents
Advertisement
Safety Precautions
Before getting started, please read the following important safety
precautions.
1.
The eBOX620-831-FL-CAN does not come equipped with an
operating system. An operating system must be loaded first
before installing any software into the computer.
2.
Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist
strap and place all electronic components in any static-
shielded devices. Most electronic components are sensitive
to static electrical charge.
3.
Disconnect the power cord from the eBOX620-831-FL-CAN
before making any installation. Be sure both the system and
the external devices are turned OFF. Sudden surge of power
could ruin sensitive components. Make sure the eBOX620-
831-FL-CAN is properly grounded.
4.
Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
5.
Turn OFF the system power before cleaning. Clean the system
using a cloth only. Do not spray any liquid cleaner directly
onto the screen.
6.
Do not leave this equipment in an uncontrolled environment
where the storage temperature is below -20℃ or above 60℃.
It may damage the equipment.
7.
Do not open the system's back cover. If opening the cover
for maintenance is a must, only a trained technician is
allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from
electrostatic discharge, observe the following precautions:
iii
Advertisement
Table of Contents
Need help?
Do you have a question about the eBOX620-831-FL-CAN Series and is the answer not in the manual?