Performing A Control Solution Test - Infopia Glucolab Instructions For Use Manual

Performing Your Test
Step 4-1.
If you selected to use the activity based features during
set up, press
correlates with your result, then press
If you do not select to use User Activity option during set
up, press
Step 4-2.
If you selected to use the User ID feature during setup,
press
with your result, then press
Record the result value in your logbook. When glucose
test strip is removed, glucose test meter turns off
automatically.
CAUTION !
Although you already set the user option and individual ID, if you pull the test strip out right
after test, you cannot move onto step 4.
Please refer to page 13, if you want to set the activity and individual ID options.
In ID ON mode, the data not stored in any ID number is automatically saved in, but the user
can see the data in ID OFF mode.
24
and to select the activity that
.
.
and to select the User ID that correlates
.

Performing a Control Solution Test

How to perform Your the
Before Perfoming Your Control Solution Test, press
displayed.
As the control solution symbol appears, apply the control solution to the test strip.
CAUTION !
• Control solution data and your real data tested are stored differently.
• Control solution can only be checkd in ID OFF mode.
Control SolutionTest.
or button, after is
25