Test Your Blood - Preparation - Infopia Glucolab Instructions For Use Manual

Collecting a Drop of Blood
Disposing of your lancet
1. Push the needle into the protective
cover.
Recommended Available Lancing Device
infopia, Element, lanzo, greenlan sterile Lancet is used with a Lanzo
Lancing device.
Note : Please, contact your supplier to make sure you are using proper Lancing
device.
STORAGE
• The lancets must be stored at room temperature (2~30
sunlight or moisture
• High temperature, high humidity should be avoided, should be kept well-
ventilated place.
• It expires 5 years after sterilized packing using gamma irradiation.
20
2. Pull the lancet out and discard
accordingly.
℃
) protected from

Test Your Blood - Preparation

Test Your Blood - Preparation
Practice using the lancing device and become accustomed with its use.
Wash your hands with warm, clean water and soap. Dry your hands
completely before testing.
Step 1.
Firmly insert the Test Strip into the
"arrow" facing up. The meter will automatically turn on and display the code number
and testing temperature. After 3 seconds, the code number and testing temperature
will disappear.
When blinking, apply your blood to the test port.
Note: Inserting the test strip in the wrong direction will turn the meter on but you will
be unable to test.
CAUTION !
• If you did not confirm the code in 3 seconds, pull the test strip out of the port, and re-start
the procedure from the beginning.
• If the code on the LCD display window and on the test vial do not match, follow the coding
procedure for accurate results (refer p18).
• If you apply your blood sample too early, the ERROR 5 message will appear on LCD
(refer p 38).
* For a more accurate test results avoid testing under direct sunlight.
Meter test strip port with the
21