64
1-1. For safe use
Child restraint system fixed with a seat belt
A child restraint system for a small child or baby must itself be properly
restrained on the seat with the lap portion of the lap/shoulder belt.
◆
Installing child restraint system using a seat belt (child restraint lock func-
tion belt)
Install the child restraint system in accordance to the operation manual
enclosed with the child restraint system.
Rear-facing — Infant seat/convertible seat
■
Adjust the seatback
1
If there is gap between the child seat and the seatback, adjust the seatback
until good contact is achieved.
Place the child restraint system
2
on the rear seat facing the rear of
the vehicle.
Run the seat belt through the
3
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Fully extend the shoulder belt and
4
allow it to retract to put it in lock
mode. In lock mode, the belt can-
not be extended.
NX200t_U_OM78006U