Connecting A Bluetooth Phone; Auto And Manual Connection; Reconnecting A Bluetooth Phone; Connecting A Phone While Bluetooth Audio Is Playing - Lexus NX200t Owner's Manual

Connecting a Bluetooth
There are two connecting methods available: automatic and manual.
Auto connection
When you register a phone, auto connection will be activated. It is recom-
mended to have the system set to this mode and leave the Bluetooth
place where a good connection can be established.
When the engine switch is turned to ACCESSORY or IGNITION ON mode,
the system will search for a nearby cellular phone you have registered.
Next, the system automatically connects with the most recent phone that was
connected. The connected result is displayed.
Manual connection
When auto connection has failed or "Bluetooth
connect the Bluetooth
Go to "Bluetooth
1
Select the device to connect.
2
Select "Connect All", "Connect as a Phone" or "Connect as an Audio player".
3
If the desired Bluetooth
(P. 374)
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Reconnecting a Bluetooth
■
If the system cannot connect due to poor signal strength with the engine switch in
ACCESSORY or IGNITION ON mode, the system will automatically attempt to recon-
nect.
If the phone is turned off, the system will not attempt to reconnect. In this case, the con-
nection must be made manually, or the phone must be reselected.
Connecting a phone while Bluetooth
■
®
Bluetooth audio will stop temporarily.
●
It may take time to connect.
●
NX200t_U_OM78006U
®
phone
®
device manually.
*
Setup": "MENU" button  "Setup"  "Bluetooth
®
device is not displayed, register the device.
®
phone
®
audio is playing
5-7. Connecting Bluetooth
*
Power" is turned off, you must
377
®
®
phone in a
5
*
"