To Prevent Damage Or Fire - Lexus NX200t Owner's Manual

538
7-3. Do-it-yourself maintenance
WARNING
Replacing light bulbs
■
Be sure to stop the engine and turn off the lights. Do not attempt to replace the bulb
●
immediately after turning off the lights.
The bulbs become very hot and may cause burns.
Do not touch the glass portion of the light bulb with bare hands. When it is unavoid-
●
able to hold the glass portion, use and hold with a clean dry cloth to avoid getting
moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.
Fully install light bulbs and any parts used to secure them. Failure to do so may result
●
in heat damage, fire, or water entering the headlight unit. This may damage the head-
lights or cause condensation to build up on the lens.
Do not attempt to repair or disassemble light bulbs, connectors, electric circuits or
●
component parts.
Doing so may result in death or serious injury due to electric shock.

To prevent damage or fire

■
Make sure bulbs are fully seated and locked.
●
Check the wattage of the bulb before installing to prevent heat damage.
●
NX200t_U_OM78006U