When The Engine Is Hot; When Adding Coolant; Radiator And Condenser; When The Electric Cooling Fans Are Operating - Lexus NX200t Owner's Manual

Hide thumbs Also See for NX200t:

Table of Contents

When the engine is hot

Do not remove the engine coolant reservoir and the intercooler coolant reservoir cap.

The cooling system may be under pressure and may spray hot coolant if the cap is

removed, causing serious injuries, such as burns.

Coolant is neither plain water nor straight antifreeze. The correct mixture of water and

antifreeze must be used to provide proper lubrication, corrosion protection and cool-

ing. Be sure to read the antifreeze or coolant label.

If you spill coolant

Be sure to wash it off with water to prevent it from damaging parts or paint.

Check the radiator and condenser and clear away any foreign objects.

If either of the above parts is extremely dirty or you are not sure of their condi-

tion, have your vehicle inspected by your Lexus dealer.

When the engine is hot

Do not touch the radiator or condenser as they may be hot and cause serious injuries,

such as burns.

Do not touch the engine compartment.

With the engine switch in IGNITION ON mode, the electric cooling fans may auto-

matically start to run if the air conditioning is on and/or the coolant temperature is high.

Be sure the engine switch is off when working near the electric cooling fans or radia-

NX200t_U_OM78006U

7-3. Do-it-yourself maintenance

Show Quick Links

Table of Contents