Engine (Ignition) Switch; Starting The Engine; Stopping The Engine; Driving Procedures - Lexus NX200t Owner's Manual

Engine (ignition) switch

Performing the following operations when carrying the electronic key on your
person starts the engine or changes engine switch modes.

Starting the engine

Check that the parking brake is set.
1
Check that the shift lever is in P.
2
Firmly depress the brake pedal.
3
and a message will be displayed
on the multi-information display.
If it is not displayed, the engine cannot
be started.
Press the engine switch.
4
The engine will crank until it starts or for
up to 30 seconds, whichever is less.
Continue depressing the brake pedal
until the engine is completely started.
The engine can be started from any
engine switch mode.

Stopping the engine

Stop the vehicle completely.
1
Shift the shift lever to P. (P. 198)
2
Set the parking brake. (P. 205)
3
If the parking brake is in automatic mode, the parking brake is set automatically when
shifting the shift lever to P. (
Press the engine switch.
4
Release the brake pedal and check that the display on the instrument cluster is
5
off.
NX200t_U_OM78006U

4-2. Driving procedures

P. 204
)
193
4