When Washing The Vehicle; When Cleaning The Windshield (Vehicles With Rain-Sensing Windshield Wipers); Precautions Regarding The Exhaust Pipe; Precautions Regarding The Blind Spot Monitor (If Equipped) - Lexus NX200t Owner's Manual

Hide thumbs Also See for NX200t:
Table of Contents

Advertisement

474
7-1. Maintenance and care
WARNING

When washing the vehicle

Do not apply water to the inside of the engine compartment. Doing so may cause the
electrical components etc. to catch fire.

When cleaning the windshield (vehicles with rain-sensing windshield wipers)

Set the wiper switch to off.
If the switch is in "AUTO", the wipers may oper-
ate unexpectedly in the following situations,
and may result in hands being caught or other
serious injuries and cause damage to the wiper
blades.
When the upper part of the windshield where the raindrop sensor is located is
touched by hand
When a wet rag or similar is held close to the raindrop sensor
If something bumps against the windshield
If you directly touch the raindrop sensor body or if something bumps into the raindrop
sensor

Precautions regarding the exhaust pipe

Exhaust gasses cause the exhaust pipe to become quite hot.
When washing the vehicle, be careful not to touch the pipe until it has cooled suffi-
ciently, as touching a hot exhaust pipe can cause burns.

Precautions regarding the Blind Spot Monitor (if equipped)

If the paint of the rear bumper is chipped or scratched, the system may malfunction. If
this occurs, consult your Lexus dealer.
NX200t_U_OM78006U
Off

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents