Canceling And Resuming The Speed Control; Approach Warning (Vehicle-To-Vehicle Distance Control Mode); Warnings May Not Occur When - Lexus NX200t Owner's Manual

236
4-5. Using the driving support systems

Canceling and resuming the speed control

Pulling the lever toward you cancels
1
the speed control.
The speed setting is also canceled when
the brake pedal is depressed.
Pushing the lever up resumes the
2
speed control and returns vehicle
speed to the set speed.
However, when a vehicle ahead is not detected in vehicle-to-vehicle distance control
mode, cruise control does not resume when the actual vehicle speed is approximately
25 mph (40 km/h) or less. Also, when the vehicle is in constant speed control mode
and the actual vehicle speed is approximately 25 mph (40 km/h) or less, cruise con-
trol does not resume as the set speed is cleared.

Approach warning (vehicle-to-vehicle distance control mode)

When your vehicle is too close to a
vehicle ahead, and sufficient automatic
deceleration via the cruise control is
not possible, the display will flash and
the buzzer will sound to alert the driver.
An example of this would be if another
driver cuts in front of you while you are
following a vehicle. Depress the brake
pedal to ensure an appropriate vehicle-
to-vehicle distance.

Warnings may not occur when

■
In the following instances, there is a possibility that the warnings will not occur:
When the speed of the preceding vehicle matches or exceeds your vehicle
●
speed
When the preceding vehicle is traveling at an extremely slow speed
●
Immediately after the cruise control speed was set
●
When depressing the accelerator pedal
●
NX200t_U_OM78006U