Garage Door Operation Indicators; Erasing The Entire Homelink Memory (All Three Codes) - Lexus NX200t Owner's Manual

460
6-4. Other interior features

Garage door operation indicators

The status of the opening and closing of
a garage door is shown by the indica-
tors.
Opening
1
Closing
2
This function is only available if the
garage door opener motor used is a
compatible device. (To check device
compatibility,
www.HomeLink.com.)
Orange (flashing)
The indicators can operate within approximately 820 ft. (250 m) of the
garage door. However, if there are obstructions between the garage door and
the vehicle, such as houses and trees, feedback signals from the garage door
may not be received.
To recall the previous door operation status, press and release either
®
HomeLink
The last recorded status will be displayed for 3 seconds.
Erasing the entire HomeLink
Press and hold the 2 outside buttons for
10 seconds until the HomeLink
cator light changes from continuously
lit orange to rapidly flashing green.
If you sell your vehicle, be sure to erase
the programs stored in the HomeLink
memory.
NX200t_U_OM78006U
refer to
Color
Green
Red (flashing)
buttons and
®
memory (all three codes)
®
indi-
®
Status
Currently opening/closing
Opening/closing has completed
Feedback signals cannot be received
or and simultaneously.