Child Restraint System Fixed With A Seat Belt; Installing Child Restraint System Using A Seat Belt (Child Restraint Lock Function Belt); Rear-Facing — Infant Seat/Convertible Seat - Lexus rx450h Service Manual

Child restraint system fixed with a seat belt

A child restraint system for a small child or baby must itself be properly
restrained on the seat with the lap portion of the lap/shoulder belt.
◆
Installing child restraint system using a seat belt (child restraint lock func-
tion belt)
Install the child restraint system in accordance to the operation manual
enclosed with the child restraint system.
Rear-facing — Infant seat/convertible seat
■
Adjust the rear seat
1
If there is a gap between the child seat and the seatback, adjust the seat-
back angle until good contact is achieved.
Place the child restraint system
2
on the rear seat facing the rear of
the vehicle.
Run the seat belt through the
3
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Fully extend the shoulder belt and
4
allow it to retract to put it in lock
mode. In lock mode, the belt can-
not be extended.
RX450h_U_OM0E013U
65
1-2. Child safety
1