304
4-5. Using the driving support systems
Changing the pre-collision system
Changing the alert timing of the pre-collision system
■
Each time the PCS switch is pressed,
the response to the distance
changes as follows.
Far
1
*
Middle
2
Near
3
*:
Default setting
Turning off the pre-collision system
■
Press the PCS switch for 3 seconds
or more seconds.
The PCS warning light turns on and a
message is shown on the multi-infor-
mation display.
To turn on the system, press the PCS
switch again. The system is set to ON
each time the engine switch is turned
to IGNITION ON mode.
Radar sensor
The radar sensor detects vehicles or
other obstacles on or near the road
ahead and determines whether a colli-
sion is imminent based on the position,
speed, and heading of the obstacles.
NX200t_U_OM78006U