Adjusting the position of and opening and closing the air outlets
■
Front
Direct air flow to the left or right, up or down
1
Turn the knob to open or close the vent
2
Registering air conditioning settings to electronic keys (vehicles with driving position
■
memory)
Unlocking the vehicle using an electronic key and turning the engine switch to IGNI-
●
TION ON mode will recall that key' s registered air conditioning settings.
When the engine switch is turned off, the current air conditioning settings will automat-
●
ically be registered to the electronic key that was used to unlock the vehicle.
The system may not operate correctly if more than one electronic key is in the vicinity or
●
if the smart access system with push-button start is used to unlock a passenger door.
The doors that can recall the air conditioning setting when unlocked using the smart
●
access system with push-button start can be changed.
dealer.
*
: The doors that can recall the driving position memory are changed at the same time.
Using automatic mode
■
Fan speed is adjusted automatically according to the temperature setting and the ambi-
ent conditions.
Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately
after the "AUTO" button is pressed or "AUTO" is selected.
When the outside temperature exceeds 75F (24C) and the air conditioning system
■
is on
In order to reduce the air conditioning power consumption, the air conditioning system
●
may switch to recirculated air mode automatically.
This may also reduce fuel consumption.
Recirculated air mode is selected as a default mode when the engine switch is turned to
●
IGNITION ON mode.
It is possible to switch to outside air mode at any time by pressing
●
NX200t_U_OM78006U
6-1. Using the air conditioning system and defogger
Rear
*
For details, contact your Lexus
427
6
.