Alarms And Warning Messages; Battery-Saving Function - Lexus NX200t Owner's Manual

Hide thumbs Also See for NX200t:
Table of Contents

Advertisement

132
3-2. Opening, closing and locking the doors

Alarms and warning messages

A combination of exterior and interior alarms as well as warning messages shown on the
multi-information display are used to prevent theft of the vehicle and accidents resulting
from erroneous operation. Take appropriate measures in response to any warning mes-
sage on the multi-information display. (P. 557)
The following table describes circumstances and correction procedures when only
alarms are sounded.
Alarm
Exterior
sounds once for 5
seconds
Interior alarm pings
repeatedly
When "Smart Access System Malfunction See Owner's Manual" will be displayed on
the multi-information display
The system may be malfunctioning. Have the vehicle inspected by your Lexus dealer
immediately.

Battery-saving function

The battery-saving function will be activated in order to prevent the electronic key bat-
tery and the battery from being discharged while the vehicle is not in operation for a long
time.
In the following situations, the smart access system with push-button start may take
some time to unlock the doors.
• The electronic key has been left in an area of approximately 6 ft. (2 m) of the outside
of the vehicle for 10 minutes or longer.
• The smart access system with push-button start has not been used for 5 days or
longer.
If the smart access system with push-button start has not been used for 14 days or
longer, the doors cannot be unlocked at any doors except the driver' s door. In this case,
take hold of the driver' s door handle, or use the wireless remote control or the mechan-
ical key, to unlock the doors.
NX200t_U_OM78006U
Situation
alarm
An attempt was made to lock
the vehicle while a door was
open.
The engine switch was turned to
ACCESSORY mode while the
driver' s door was open (The
driver' s door was opened when
the engine switch was in
ACCESSORY mode).
Correction procedure
Close all of the doors and
lock the doors again.
Turn the engine switch off
and close the driver' s door.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents