532
7-3. Do-it-yourself maintenance
Attach the cover.
8
Align the 2 tabs positions and
1
close the cover.
Fix the cover by pushing the
2
center of the clip.
Install the engine compartment cover. (P. 491)
9
Rear turn signal lights
■
Open the back door and attach
1
protective tape around the lamp
body. (Use masking tape, do not
use Duct tape, as duct tape may
leave markings.)
Remove the cover.
2
It is recommended for safeguarding
to wrap the tip of the screwdriver
with a cloth, etc., in order to prevent
scratches to the vehicle.
Remove the 2 bolts.
3
NX200t_U_OM78006U