Operating The Meter Control Switches; Drive Information; Average Fuel Consumption; Average Vehicle Speed - Lexus NX200t Owner's Manual

92
2. Instrument cluster
Warning message display
Select to display warning messages and measures to be taken if a malfunction is
detected. (P. 557)
Settings display
Select to change the meter display settings. (P. 619)
Intuitive parking assist (if equipped)
●
Automatically displayed when the system is used. (P. 270)

Operating the meter control switches

The multi-information display is oper-
ated using the meter control switches.
Select an item/change pages
1
Enter/Set
2
Return to the previous screen
3
Press:
4
Displays the screen registered to
When no screen has been registered, the drive information screen will be displayed.
Press and hold:
Registers the currently displayed screen to
The registration confirmation screen is displayed. If the selected screen cannot be
registered, a registration failure message will be shown.

Drive information

Items displayed can be switched by pressing
switches to select
Current fuel consumption
■
Displays the current rate of fuel consumption
Average fuel consumption (after reset
■
Displays the average fuel consumption since the function was reset, the
engine was started, and the vehicle was refueled, respectively
Use the displayed average fuel consumption as a reference.
Average vehicle speed (after reset
■
Displays the average vehicle speed since the function was reset and the
engine was started, respectively
NX200t_U_OM78006U
and pressing or
1
*
2
*
/after start/after refuel)
2
*
/after start)
(P. 619)
or of the meter control
.
*
1
*
1