Recording Procedure; Recall Procedure - Lexus NX200t Owner's Manual

146
3-3. Adjusting the seats
Driving position memory
Your preferred driving position (the position of the driver' s seat, steering wheel
and outside rear view mirrors) can be recorded and recalled by pressing a but-
ton.
Three different driving positions can be recorded into memory.

Recording procedure

■
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
Adjust the driver' s seat, steering wheel and outside rear view mirrors to the
3
desired positions.
While pressing the "SET" button,
4
or within 3 seconds after the
"SET" button is pressed, press
button "1", "2" or "3" until the
buzzer sounds.
If the selected button has already
been preset, the previously recorded
position will be overwritten.

Recall procedure

■
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
Press one of the buttons for the
3
driving position you want to recall
until the buzzer sounds.
NX200t_U_OM78006U