Note For A Smart Access System With Push-Button Start; Aluminum Wheels; Bumpers; Front Side Windows Water-Repellent Coating (Vehicles With Water-Repellent Coating) - Lexus NX200t Owner's Manual

Note for a smart access system with push-button start

■
If the door handle becomes wet while the electronic key is within the effective range,
●
the door may lock and unlock repeatedly. Place the key in a position 6 ft. (2 m) or more
separate from the vehicle while the vehicle is being washed. (Take care to ensure that
the key is not stolen.)
If the electronic key is inside the vehicle and a door handle becomes wet during a car
●
wash, a buzzer will sound outside the vehicle. To turn off the alarm, lock all the doors.
Set the electronic key to battery-saving mode to disable the smart access system with
●
push-button start. (P. 132)

Aluminum wheels

■
Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or
●
abrasive cleaners. Do not use strong or harsh chemical cleaners.
Use the same mild detergent and wax as used on the paint.
Do not use detergent on the wheels when they are hot, for example after driving for
●
long distance in the hot weather.
Wash detergent from the wheels immediately after use.
●

Bumpers

■
Do not scrub with abrasive cleaners.

Front side windows water-repellent coating (vehicles with water-repellent coating)

■
The following precautions can extend the effectiveness of the water-repellent coating.
●
• Remove any dirt, etc. from the front side windows regularly.
• Do not allow dirt and dust to accumulate on the windows for a long period.
Clean the windows with a soft, damp cloth as soon as possible.
• Do not use wax or glass cleaners that contain abrasives when cleaning the windows.
• Do not use any metallic objects to remove condensation build up.
When the water-repellent performance has become insufficient, the coating can be
●
repaired. Contact your Lexus dealer.
NX200t_U_OM78006U
7-1. Maintenance and care
473
7