Changing Engine Switch Modes; When Stopping The Engine With The Shift Lever In A Position Other Than P - Lexus NX200t Owner's Manual

194
4-2. Driving procedures

Changing engine switch modes

Modes can be changed by pressing the engine switch with brake pedal released.
(The mode changes each time the switch is pressed.)
*
Off
1
The emergency flashers can be used.
ACCESSORY mode
2
Some electrical components such as the
audio system can be used.
"ACCESSORY" will be displayed on the
multi-information display.
IGNITION ON mode
3
All electrical components can be used.
"IGNITION ON" will be displayed on
the multi-information display.
*
: If the shift lever is in a position other than
P when turning off the engine, the
engine switch will be turned to ACCES-
SORY mode, not to off.

When stopping the engine with the shift lever in a position other than P

If the engine is stopped with the shift lever in a position other than P, the engine
switch will not be turned off but instead be turned to ACCESSORY mode. Per-
form the following procedure to turn the switch off:
Check that the parking brake is set.
1
Shift the shift lever to P.
2
Check that "Turn Off Vehicle" is displayed on the multi-information display
3
and then press the engine switch once.
Check that "Turn Off Vehicle" on the multi-information display is off.
4
NX200t_U_OM78006U