After A Fuse Is Replaced; If There Is An Overload In A Circuit; When Replacing Light Bulbs; To Prevent System Breakdowns And Vehicle Fire - Lexus NX200t Owner's Manual

522
7-3. Do-it-yourself maintenance

After a fuse is replaced

■
If the lights do not turn on even after the fuse has been replaced, a bulb may need
●
replacement. (P. 523)
If the replaced fuse blows again, have the vehicle inspected by your Lexus dealer.
●

If there is an overload in a circuit

■
The fuses are designed to blow, protecting the wiring harness from damage.

When replacing light bulbs

■
Lexus recommends that you use genuine Lexus products designed for this vehicle.
Because certain bulbs are connected to circuits designed to prevent overload, nongenu-
ine parts or parts not designed for this vehicle may be unusable.
WARNING

To prevent system breakdowns and vehicle fire

■
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or injury.
Never use a fuse of a higher amperage rating than that indicated, or use any other
●
object in place of a fuse.
Always use a genuine Lexus fuse or equivalent.
●
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
●
NOTICE
Before replacing fuses
■
Have the cause of electrical overload determined and repaired by your Lexus dealer as
soon as possible.
NX200t_U_OM78006U