After A Fuse Is Replaced; If There Is An Overload In A Circuit; When Replacing Light Bulbs - Lexus LX 570 2016 Service Manual

After a fuse is replaced

■
If the lights do not turn on even after the fuse has been replaced, a bulb may need
●
replacement. (P. 508)
If the replaced fuse blows again, have the vehicle inspected by your Lexus dealer.
●

If there is an overload in a circuit

■
The fuses are designed to blow, protecting the wiring harness from damage.

When replacing light bulbs

■
Lexus recommends that you use genuine Lexus products designed for this vehicle.
Because certain bulbs are connected to circuits designed to prevent overload, non-gen-
uine parts or parts not designed for this vehicle may be unusable.
WARNING
To prevent system breakdowns and vehicle fire
■
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or injury.
Never use a fuse of a higher amperage rating than indicated, or use any other object
●
in place of a fuse.
Always use a genuine Lexus fuse or equivalent.
●
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or the fuse boxes.
●
NOTICE
Before replacing fuses
■
Have the cause of electrical overload determined and repaired by your Lexus dealer,
as soon as possible.
LX570_OM_OM60N01U_(U)
6-3. Do-it-yourself maintenance
507
6