Canceling And Resuming The Speed Control; Approach Warning (Vehicle-To-Vehicle Distance Control Mode) - Lexus rx350 2016 Owner's Manual

Hide thumbs Also See for rx350 2016:
Table of Contents

Advertisement

Canceling and resuming the speed control

Pulling the lever toward you cancels
1
the speed control.
The speed setting is also canceled when
the brake pedal is depressed.
(When the vehicle has been stopped by
system control, depressing the brake
pedal does not cancel the setting.)
Pushing the lever up resumes the
2
cruise control and returns vehicle
speed to the set speed.
However, when a vehicle ahead is not detected, cruise control does not resume when
the vehicle speed is approximately 25 mph (40 km/h) or less.

Approach warning (vehicle-to-vehicle distance control mode)

When your vehicle is too close to a
vehicle ahead, and sufficient automatic
deceleration via the cruise control is
not possible, the display will flash and
the buzzer will sound to alert the driver.
An example of this would be if another
driver cuts in front of you while you are
following a vehicle. Depress the brake
pedal to ensure an appropriate vehicle-
to-vehicle distance.
Warnings may not occur when
In the following instances, warnings may not occur even when the vehicle-to-
vehicle distance is small.
When the speed of the preceding vehicle matches or exceeds your vehicle
speed
When the preceding vehicle is traveling at an extremely slow speed
Immediately after the cruise control speed was set
When depressing the accelerator pedal
RX350_U_OM48E90U
4-5. Using the driving support systems
309
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents