snom UC Edition and snom 715/D715/710
Transferring calls to Directory lookup - attended
1. With the active call on the line, press Hold . The call is put on hold.
ABS
2. Press
to open Directory search. Enter the name of the person you want to transfer the
call to.
Note: You do not need to switch to letter mode to enter the name. If you want
to look up "Steve", for example, entering "78383" in numeral mode will yield all
names with combinations of the letters on keys
Enter the characters in quick succession. Once you have entered at least three characters, the
search will start as soon as you pause. To narrow down the list of names presented to you on the
display, enter more characters. Use
3. When the right name is highlighted, press
4. When the callee picks up your call, announce the call you want to transfer. If the callee wants to
accept the call, press
5. You will see the Transfer Party screen.
NOTE: If you have more than one call on hold and the call you want to transfer is
not onscreen at this point, press
must be onscreen when you press
6. When the transfer party is onscreen, press
/
to scroll to the name you want.
, select a connection, and press
Xfer .
Xfer .
.
to scroll to it. The call to be transferred
21
Transferring calls
.
again.