D315 | D305 User Manual
•
Putting one participant on hold. With one of the participants on-screen selected by the preceding
arrow (Fig. 2 and 3), press
private.
To restart the conference, press
•
To terminate the conference and the connections to both parties, select the conference (Fig. 1) and
press
.
Transferring calls
You can transfer connected calls as well as calls ringing on your phone.
•
When you have a call on the line, there are two ways to transfer it to a third party:
◦
Announcing the call to the third party first, to make sure the call is welcome and will be
accepted: Attended transfer;
◦
Transferring the call unannounced: Blind transfer. There will be no feedback on whether the
third party is available and/or picking up the call.
•
When a call is ringing on your phone, you can transfer it to a third party without answering it first
(blind transfer only).
Attended transfer
1. Put the call on hold.
2. Dial the number you want to transfer the call to and announce the call (Fig. 1).
3. If the third party wants to accept the call, press the function key underneath
Fig. 1
NOTE: If there is more than one call on hold and the call you want to transfer is not
on-screen, press
Fig. 3
4. With the Transfer Party screen on the display (Fig. 2 or, if more than one call is on hold, Fig. 3 or
4), press
.
to put this party on hold and to converse with the other party in
to put the connected party on hold again, then press
Fig. 2
to put it on-screen (Fig. 3 and 4).
Fig. 4
53
Using the Phone
.
.