Using Sip Uri, Domain\Username, And Password - Snom UC Edition 710 User Manual

snom UC Edition and snom 715/D715/710
U
sing SIP URI, domain\username, and password
If the required data for the logon is SIP URI, domain\username, and password, you can switch to this
logon method by pressing
Entering special characters in letter mode:
Press once to enter the period ".".
◦
Press three times to enter "@".
◦
Press twelve times to enter the backslash "\".
◦
Use to delete the character to the left of the prompt; use
◦
left/right.
1. Enter the SIP URI and press
2. Enter the domain\username and press
3. Enter the password and press
4. If this login was successful, the phone will switch to the "signing in" screen and then show the idle
screen with your Lync account. If the login is unsuccessful, either because of a typo or because
the network will not accept the data, the phone will show the "Welcome" screen again and prompt
you to enter the extension number and the PIN.
.
. The format is "my.name@test.com".
. The format is "test\my.name".
.
/
7
Logon and logoff
to move the cursor to the