Snom UC Edition 710 User Manual page 35

snom UC Edition and snom 715/D715/710
Fig. H-1
Fig. H-4
• Figures H-1 to H-3:
In Fig. H-1 the connected call is on-screen. Press
◦
screen.
In Fig. H-2 the first held call of a total of two (1/2) is on the screen. Press
◦
put the second held call (2/2) on the screen (Fig. H-3).
With the second held call (2/2) on the screen, press
◦
(Fig. H-1).
When a held call is on-screen, press
◦
hold.
• Figures H-4 to H-6:
◦ In Fig. H-4 the first held call of a total of three Calls on Hold (1/3) is on-screen. Press
to put the second held call on the screen.
◦ In Fig. H-5 the second held call (2/3) is on the screen. Press
held call (3/3) on the screen (Fig. H-6). If there are more held calls, continue likewise.
◦ With the last held call (3/3, in our example) on the screen, press
held call (Fig. H-4).
To connect to the held call currently on-screen, press .
◦
• When the connected call is on-screen, you can terminate it by pressing
• You can transfer the connected on-screen call. See "Transferring calls" on page 16 for more
information.
Fig. H-2
Fig. H-5
to put the first held call on the
to scroll to the connected call
to connect to it and put the current connected call on
35
Hold
Fig. H-3
Fig. H-6
again to
again to put the third
to scroll to the first
.