Hold; One Call On Hold; Holding Multiple Calls - Snom UC Edition 710 User Manual

snom UC Edition and snom 715/D715/710
H
old
O
ne call on hold
Press Hold to put the ongoing call on hold.
Held calls are indicated threefold:
◦ By the text on the display.
By the slowly blinking line key (green LED).
◦
◦ By the glowing call indication LED (red LEDs).
You can now:
◦ transfer the held call blindly or with prior announcement - see "Transferring calls" on page
16.
receive and make calls and put other calls on hold.
◦
Pick up the held call by pressing its line key or by pressing Hold again. If the other party hangs up
while on hold the call terminates on your phone as well, and the indicators are turned off.
H
olding multiple calls
If you are in a call with one party and have one or more calls on hold or if there is more than one call on
hold, you can switch back and forth between the active call and any call on hold, transfer calls, etc. The
info bar and the status line will tell you how many total calls there are and which one you are connected
to. Your input on the phone's keys will affect the call on-screen at the time, i.e., the call shown in the
contact area of the display. Up to 4 simultaneous calls are possible.
Figures H-1 to H-3 show the phone connected to one call with two calls on hold; Figures H-4 to H-6
show the phone with three calls on hold and no connected call.
34

Hold