Table of Contents
Advertisement
Making Settings Related to Input Signals
Changing signal display names
74
Basic Switcher Settings
4
Make the reference sync signal settings.
Rotate the F1 knob to specify an input sync signal, and rotate the F2 knob
to specify an output sync signal.
The correspondence between knobs and parameters is as follows.
Knob Parameter
Description
F1
Ref-I
Input reference sync
signal
F2
Ref-O
Output reference sync
signal
a) Selectable only when the video format is set to an HD signal (720/50, 720/59, 1080/50, 1080/59)
(see page 71).
Note
When the video format is set to 1080/59 or 525/59, and you set Ref-O to BB,
the setting of Set (see page 71) in the System >Type sub menu is also reflected
in the reference sync signal.
You can change the input signal names displayed in menus to user-specified
names up to four alphanumeric characters long.
To change the names, save a text file containing a list of the current signal names
to a USB flash drive, edit the names on a computer, and then load the edited list
into the switcher.
Tip
Signals have the following display names when the switcher is shipped from the
factory.
Signal name
BLK
IN01 to IN08 (numbers are
channel numbers)
IN09 to IN24 (numbers are
channel numbers)
STL1 to STL4
MAT1 to MAT4
Setting range
BB: Black burst signal
TriS: Tri-level sync signal
BB: Black burst signal
TriS: Tri-level sync signal
Signal
Black signal
Input signals connected to the SDI IN 1 to 8
connectors
Input signals connected to optional input expansion
boards, when the optional boards are installed
Still images stored in the processor unit
Color matte signals for use in backgrounds, etc.
a)
a)
Advertisement
Table of Contents
