Sony DFS-900M Operating Instructions Manual page 94

Specifying the signal type of DVI output signals
94
Basic Switcher Settings
Setting of Name of
step 4 BKDF-961
connector
Compst COMP/Y
a)
B-Y
a)
R-Y
COMP
Y-CB/CR COMP/Y
B-Y
R-Y
COMP
GBR/wSync COMP/Y
B-Y
R-Y
COMP
a) Connector is disabled
5
If you selected Y/CB/CR in step 4, rotate the F4 knob to select the level of
the component output signals.
Betacam: Betacam level
SMPTE: SMPTE level
Note
Settings of step 5 can be available only when the switcher's video format
(see page 71) is set to 525/59, 720/59, or 1080/59.
When you are using the optional BKDF-962 2 DVI Output Board, specify the
signal type of the DVI signals that will be output from the board.
For more information about the BKDF-962, see page 31. For information about
how to install it, see page 39.
Output signal BKDF-961 installation
position and channel
number
Lower tray
Left
Composite signal AUX03
–
–
Composite signal AUX04
Y (luminance) signal AUX03
Color difference
(B-Y) signal
Color difference
(R-Y) signal
Composite signal AUX04
G (green) signal (with AUX03
multiplexed sync
signal)
B (blue) signal
R (red) signal
Composite signal AUX04
Upper tray
Left
AUX07
– –
– –
AUX08
AUX07
AUX08
AUX07
AUX08