Sony DFS-900M Operating Instructions Manual page 149

1
When using the BKDF-901: Depending on the key to
which you want to add the edges, press one of the
KEY1 to KEY4 buttons in the KEY
DELEGATION block, lighting it.
When using the BKDF-902: Depending on the key to
which you want to add the edges, press one of the
KEY1 to KEY4 buttons in the key/AUX bus
control block, lighting it.
2
Press the EDGE SHADOW button in the KEYER
block, lighting it.
Edges (Shadows) are enabled, and the Edge Shadow
sub menu appears in the display panel.
Edge Shadow sub menu parameters
Use the sub menus of the Edge Shadow sub menu to do the
following.
Sub menu Operation
Edge Type (Type) Select the edge type, and specify
properties such as the edge width
and softness.
Edge Color (Color) Adjust the edge color.
Edge Position (Position) Adjust the edge position.
To switch between sub menus, press the h and H
buttons in the numeric keypad.
Edge Type (Type) sub menu parameters
Operation Knob Parameter
Select the F1 Typ (Type)
edge type.
Adjust the F2 Wid (Width)
edge width.
Adjust the F3 Sft (Softness)
edge softness
(amount of
blurring).
Operation
When Extrude
is selected,
specify the
edge
direction.
(Specify as a
position
corresponding
to a number
on the face of
an analog
clock.)
Example: 3
corresponds
to the
direction from
3 o'clock.
Edge Color (Color) sub menu parameters
Operation
Adjust the
luminance of
the edges.
Adjust the
saturation
(color density)
of the edges.
Adjust the hue
of the edges.
Edge Position (Position) sub menu parameters
Settings
Operation
Normal: Normal
When Shadow
edges
is selected,
Outline: Outline
specify the X
Extrude: Drop
coordinate of
shadow
the position
Shadow:
where the
Shadow
shadow is
added.
1 to 8
When Shadow
is selected,
0.0 to 100.0
specify the Y
coordinate of
the position
where the
shadow is
added.
Knob Parameter Settings
F4 Dir (Direction) 0 to 11
Knob Parameter Settings
F2 Lum (Luminance) 0.0 to 108.6
F3 Sat (Saturation) 0.0 to 100.0
F4 Hue 0.0 to 359.5
Knob Parameter Settings
F2 PX (Position X) –100.0 to 100.0
F3 PY (Position Y) –100.0 to 100.0
Adding Edges to Keys
149