Modifying Wipe Patterns; Registering User Patterns - Sony DFS-900M Operating Instructions Manual

Wipe Pattern (Pattern) sub menu
parameters
Adjust the following parameters to create a border.
Operation Knob Parameter
Set the F2 Wid (Border
border Width)
width
Set the F3 Soft (Border
border Softness)
softness
Select Src (Border
a)
F4
video to Source)
use in the
border
a) If you have used the F4 knob to change the display names of input signals
and internal signals (see page 74), the new display names appear.
Wipe Border Color (Border Color) sub
menu parameters
Adjust the following parameters to adjust the border color.
Operation Knob Parameter
Adjust the F2 Lum (Luminance) 0.0 to 108.6
border
luminance
Adjust the F3 Sat (Saturation)
saturation
(color density)
of the border
color
Adjust the F4 Hue
hue of the
border color

Modifying Wipe Patterns

You can modify wipe patterns by adjusting the parameters
of the Wipe Modify (Modify) sub menu.
To display the Wipe Modify (Modify) sub menu
Press the WIPE POS button in the joystick block.
If another sub menu is displayed, you can switch to the
Wipe Modify sub menu by pressing the h and H
buttons in the numeric keypad.
Wipe Modify (Modify) sub menu
parameters
Adjust the following parameters to change the pattern
shape and position.
Settings
0.0 to 100.0 (Set to
0.0 if you do not want
to add a border.)
0.0 to 100.0
BLK: Black signal
IN01 to In24: Input
signals 1 to 24
MAT1 to MAT4: Color
matte signals 1 to 4
STL1 to STL4: Still
images 1 to 4
W.Bd (Wipe Border
Matte): Wipe
border matte

Registering User Patterns

You can use the User sub menu to register customized
wipe patterns.
1
2
Settings
3
0.0 to 100.0
0.0 to 359.5
4
To unregister a pattern
Rotate the F1 knob in the Display Panel/Menu Control
Block to select the pattern number to unregister, and then
press the F4 knob and hold it down for one second or
longer.
Operation Knob Joystick
Set the F1
pattern
aspect ratio
Set the F2
pattern Move left and
horizontal right
position (X
coordinate)
Set the F3
pattern Move up and
vertical down
position (Y
coordinate)
Set the F4
pattern Rotate
clockwise/
rotation
angle counterclockwise
Customize a wipe pattern with one of the sub menus.
Press the h or H button in the numeric keypad until
the User sub menu appears.
Rotate the F1 knob in the Display Panel/Menu Control
Block to select the number under which to register the
pattern.
Knob Parameter Description
F1 Usr (User Number under
Pattern) which to
register the
pattern
a) An asterisk (*) appears after the number when a user pattern has
already been registered.
Press the F2 knob and hold it down for one second or
longer.
The pattern is registered under the number selected in
step 3.
Parameter Settings
Asp –1.000 to 1.000
(Aspect)
PX –1.000 to 1.000
(Center
Position X)
PY –1.000 to 1.000
(Center
Position Y)
Ang –16.000 to
(Angle) 16.000
Settings
a)
120 to 159
Customizing Wipe Patterns
133