Options; Bkdf-910 4 Sdi Input Board; Bkdf-911 2 Sd Video Input Board; Bkdf-912 2 Dvi Input Board - Sony DFS-900M Operating Instructions Manual

Options

BKDF-910 4 SDI Input Board

SDI IN 1 to 4 connectors
SDI IN (SDI input) 1 to 4 connectors (BNC type)
Input SDI signals. One board has four connectors, and up
to four boards can be installed.
Together with the standard SDI input signals 1 to 8, this
allows you to input up to a maximum of 24-SDI signals.
Connectors 1 and 2 only are equipped with internal
up-converters.
For details, see "Installing I/O Expansion Boards" (page
39) and "Making up-convert input settings" (page 81).

BKDF-911 2 SD Video Input Board

ANALOG IN (analog input) 1 to 4 connectors
ANALOG IN (analog input) 1 to 4 connectors
(BNC type)
Input SD analog signals. Both composite and component
signals can be input.
The following table shows the name of each connector and
input signals.
Connector Connector Input signals
number name
Composite
1 COMP/Y Composite
signal
2 B-Y Not used
3 R-Y Not used
4 COMP Composite signal
For signal settings, see "Specifying the signal type of
analog input signals" (page 83).

BKDF-912 2 DVI Input Board

DVI IN (DVI input) 1 and 2 connectors (DVI-I type)
Connect a computer which is equipped with DVI output
connectors.
For signal settings, see "Specifying the signal type of DVI
input signals" (page 85).

BKDF-960 4 SDI Output Board

SDI OUT (SDI output) 1 to 4 connectors (BNC
type)
Output SDI signals. One board has four connectors, and up
to two boards can be installed.
Together with the standard SDI output signals 1 to 4, this
allows you to output up to a maximum of 12 signals.
Connectors 1 and 2 only are equipped with internal
down-converters.
For details, see "Installing I/O Expansion Boards" (page
39) and "Making down-convert output settings" (page
91).

BKDF-961 2 SD Video Output Board

Component
Luminance
signal (Y)
Color difference
signal (B-Y)
Color difference
ANALOG OUT (analog output) 1 to 4 connectors
signal (R-Y)
(BNC type)
Output SD analog signals. Both composite and component
signals can be output.
The following table shows the name of each connector and
output signals.
DVI IN (DVI input) 1 and 2 connectors
SDI OUT 1 to 4 connectors
ANALOG OUT (analog output) 1 to 4 connectors
31
Options