Adjusting 3D Dme Warp Effects - Sony DFS-900M Operating Instructions Manual

Trail effect example
Make trail and chroma control settings in the following sub
menus.
Sub menu
a)
Trail
Chroma Control
a) Shown only on the touch panel
To display the Sub Effects sub menus
Press the SHIFT button in the DME/SETUP block,
lighting it, and then press the SUB EFF button.
The most recently used sub menu appears in the display
panel.
To switch between sub menus, press the h and H
buttons in the numeric keypad.
Trail sub menu parameters
Adjust the following parameters to select whether to add a
trail effect, and to adjust the length and color of the trail, if
added.
The Trail sub menu has two pages. To switch between
pages, press the h and H buttons in the numeric
keypad.
(xxx: "M/E" appears if you are setting up a transition, and
"KEYER" appears if you are setting up a key.)
xxx Trail 1 (1)
Operation Knob
Selects F1
whether to add
a trail effect.
Adjusts the F2
length of the
afterimages.
xxx Trail 2 (2)
Operation Knob
Adjusts the F2
luminance of
the
afterimages.
140
Customizing DME Effects
Operation
Make trail effect settings.
Change the color type.
Parameter Settings
Typ (Trail Type) Off: Do not add
Decay: Add
Star:
Afterimage
disappearing
as stardust
Len (Length) 1 to 6
Parameter Settings
Lum 0.0 to 108.6
(Luminance)
Operation Knob Parameter
Adjusts the F3 Sat (Saturation) 0.0 to 100
saturation
(color density)
of the
afterimages
Adjusts the hue F4 Hue
of the
afterimages.
Chroma Control sub menu parameters
Adjust the following parameters to change the colors of
images (Chroma Control).
Operation Knob Parameter
Select the F1 T (Type)
chroma control
type.
Adjust the F3
Sat
saturation (color
(Saturation)
density) of the
image color.
Adjust the F4 Hue
image hue.
a) The video becomes black and white if you select Sepia and set Sat to 0.0.

Adjusting 3D DME Warp Effects

You can adjust the parameters of the Warp sub menus to
apply 3D DME warp effects to images. These effects allow
you to warp, bend, and divide images in many different
ways.
Use the sub menus of the Warp sub menu to do the
following.
Sub menu Operation
Adjust the parameters of
a)
Ripple
the Ripple effect.
Adjust the parameters of
b)
xxx Swirl
the Swirl effect.
(Swirl)
a) Adjust the parameters of
Mosaic
the Mosaic effect.
Adjust the parameters of
b)
xxx Slats
the Slats effect (which
(Slats)
divides the video into
separate strips).
a) Adjust the parameters of
Lens
the Lens effect (which
shows the video as if
seen through a lens).
Adjust the parameters of
a)
Page Turn
the Page Turn effect.
Settings
0.0 to 359.5
Settings
Through: Do
not change
the colors
Sepia: Sepia
Nega: Negative
0.0 to 100
a)
0.0 to 359.5
Operation target
pattern
numbers
100 to 114
115, 116
117, 118
119 to 124
125 to 184
185 to 223