Playing Sequences - Sony DFS-900M Operating Instructions Manual

1
Press the SEQ button in the numeric keypad.
The numeric keypad enters sequence mode.
The most recently used sub menu appears in the
display panel.
2
Press the and
j
until the Seq Setup sub menu appears.
3
Rotate the F2, F3, and F4 knobs to select whether to
change M/E, keyer, and DSK settings when the
sequence is played.
When using the BKDF-901
Knob Parameter Description
F2 BUS
F3 Keyer
F4 DSK
158
Sequence Operations
BKDF-901
BKDF-902
buttons in the numeric keypad
J
Settings
M/E settings On: Do not
other than change the
keyer settings current
settings.
Keyer
Off: Replace the
settings
current
Downstream settings with
key settings the sequence
settings.
When using the BKDF-902
Knob Parameter Description
F2 BUS M/E settings
other than
keyer
settings, and
PROGRAM/
PRESET
settings
F3 M/E Keyer
settings
F4 DSK DSK settings
When a sequence is recalled, the settings of the
recalled sequence are reflected, but they are reflected
to the currently displayed video instead of to the video
that was selected at the time when the sequence was
registered.

Playing Sequences

You can use the following four buttons in the numeric
keypad to play a sequence after recalling it.
Settings
BUS Off:
Replace M/E,
and
PROGRAM/
PRESET
settings with
the sequence
settings.
BUS On: Do not
change M/E,
and
PROGRAM/
PRESET
settings.
ME On: Do not
change the
current M/E
settings.
Replace
PROGRAM/
PRESET
settings with
the sequence
settings.
PP On: Do not
change the
current
PROGRAM/
PRESET
settings.
Replace M/E
settings with
the sequence
settings.
On: Do not
change the
current
settings.
Off: Replace the
current
settings with
the sequence
settings.