Gateway; H323-Description; H323-Gateway Voip Gw-Id - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Defaults
Instructions
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Purpose
Command Modes
Syntax

gateway

Use this command to activate the GK Client function. Disable the
GK Client function with the no command.
Global configuration

gateway

no gateway
If this area is configured, it is disabled by default.
� Only when the GK Client is activated, the router voice gateway
can normally communicate with the GK Server; otherwise, the
voice gateway cannot be connected with the GK Server.
� The gateway command can be executed successfully only
when the h323-gateway voip interface command is exe-
cuted and an interface is configured as the H.323 gateway
interface. Meanwhile, if the gateway interface is specified
again or the gateway-related parameters are modified, the
gateway command will be used to activate the GK Client
function again so that the information about the GK Client
saved in the GK Server can be updated in time.
� It is only applied to ZXR10 GAR and ZXR10 ZSR.

h323-description

Use this command to configure the h323 gateway descriptor. Re-
store the default with no command.
Global configuration
h323-description <string>
no h323-description
<string>
The parameter <string> in this command is ZXR10 Gateway by
default.
It is only applied to ZXR10 GAR and ZXR10 ZSR.

h323-gateway voip gw-id

Use this command to configure the gateway alias. Delete the alias
with the no command.
Interface configuration
h323-gateway voip gw-id <gw-name>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 VOIP Configuration
h323 gateway descriptor, not more than 64
characters.
17