ZXR10 8900 Series Command Reference (Voice and Video Volume)
Example
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
22
Confidential and Proprietary Information of ZTE CORPORATION
�
It is only applied to ZXR10 GAR and ZXR10 ZSR.
This example describes how to associate dial-peer 1 in pots type
to port voice_1/3.
ZXR10(config)#dial-peer voice 1 pots
ZXR10(config-pots1)#port voice_1/3
prefix
Use this command to configure the prefix of the phone number
dialed by the dial-peer. Delete the setting with no command.
Dial-up peer configuration
prefix <prefix-string>
no prefix
<prefix-string>
It is not configured by default.
�
This command is only applied to the dial-peer in pots type.
�
It is only applied to ZXR10 GAR and ZXR10 ZSR.
This example describes how to configure the prefix as 123.
ZXR10(config)#dial-peer voice 1 pots
ZXR10(config-pots1)#prefix 123
ring number
Use this command to specify the maximum ring times for the port
with no command.
Voice port configuration
ring number <number>
no ring number
<number>
It is only applied to ZXR10 GAR and ZXR10 ZSR.
This example describes how to configure the maximum ring times
of the FXO port as 3.
ZXR10(config)#voice-port voice_3/1
ZXR10(config-voice-port)#ring number 3
Prefix code with characters of 0~9 and #, not
more than 10 characters
The maximum ring times, in the range of
1~3, 1 by default