GE Kilsen KFP-CF2 Installation Manual page 67

BS 5839-1
Configuration presets for BS 5839-1 are as follows.
Two-zone control panels
Code Zone EOL
11 Active
12 Active, CleanMe
enabled
13 Active
14 Active, CleanMe
enabled
Note: CleanMe is not currently available for Kilsen detectors.
Four- and eight-zone control panels
Code Zone EOL
11 Active
12 Active, CleanMe
enabled
13 Active
14 Active, CleanMe
enabled
Additional configuration characteristics are shown below.
Default sounder delay
Default zone delay
Start/Restart sounders
Inputs and outputs are as follows.
INPUT1
INPUT2
OUT1
OUT2
OUT3
OUT4
Note: Two-zone control panels have only two outputs (OUT1 and OUT2).
Kilsen KFP-CF Series Installation Manual
Sounder outputs Zone type
2 (first phase Mixed
evacuation mode)
2 (first phase Mixed
evacuation mode)
2 (second phase Mixed
evacuation mode)
2 (second phase Mixed
evacuation mode)
Sounder outputs Zone type
4 (first phase Mixed
evacuation mode)
4 (first phase Mixed
evacuation mode)
4 (second phase Mixed
evacuation mode)
4 (second phase Mixed
evacuation mode)
0
0n
Start sounders or restart stopped sounders at access level 2 with or
without a fire alarm event
Class change
Delays off
Sounder circuit
Sounder circuit
Sounder circuit
Sounder circuit
Appendix A: Configuration presets
63