Chapter 2: Installation
Cabinet layout
Cabinet layout for two- and four-zone control panels
Figure 1: Cabinet layout for two- and four-zone control panels
1. Seven-segment display
2. Zone and fire system connectors
3. Cable knockouts
4. Mounting screw knockouts
5. Battery area
6. Key connector
7. Alarm counter connector
Note:
The alarm counter and key connectors are only included on selected regional
models.
4
8. Power supply unit
9. Power supply connector
10. Battery connector
11. Expansion module connector
12. Cable holder
13. Fuse terminal block
Kilsen KFP-CF Series Installation Manual