Front Panel - Datamax I-class Maintenance Manual

Hide thumbs Also See for I-class:

Table of Contents

Removal and Replacement

3. Remove the two Screws that secure the Cover Assembly to the Baseplate, and then lift the Cover

Assembly off the printer.

Baseplate

Screws

Replacement:

1. Lower the Cover Assembly onto the printer.

2. Reinstall the two Screws through the Cover Assembly and into the Baseplate.

3. Tighten the two Screws along the Baseplate and the two Screws along the Centerplate.

4.2 Front Panel

Removal:

1. Turn OFF and unplug the printer.

2. Remove the Cover Assembly (see Section 4.1) and the Fascia (see Section 4.3).

4-2

Table of Contents

Table of Contents

Do you have a question about the I-class and is the answer not in the manual?