Head Pressure Cams And Springs - Datamax I-class Maintenance Manual

4.4.1.1

Head Pressure Cams and Springs

Removal:
1. Remove the Printhead Assembly; see Section 4.4.1.
2. Carefully pry the Clip from the Printhead Assembly. Also, remove the two Screws that secure the
Ribbon Shield and then remove it from the Printhead Assembly.
3. Remove the Locking Screws and the Alignment Screws.
Removal and Replacement
Clip
4-11
Screws
Ribbon
Shield
Printhead
Assembly
Locking
Screws
Printhead
Assembly
Alignment
Screws