Sensor (Pass Through) Lingering Jam Service Check - Lexmark T650n Service Manual

4062
Step
7
Check the above sensor for proper connection.
Is the above sensor connected properly?
8
Perform a print test and check the pick arm assembly for
the appropriate media tray.
Is the media properly picked and advanced out of the
appropriate media tray?
9
Perform a print test and check the main motor assembly.
Is the media properly transported through the pass through
areas of the media trays?
10
Perform a print test using the appropriate input tray.
Does the error continue?

Sensor (pass through) lingering jam service check.

Use this procedure for the following jams:
• 242.08
• 244.40
Step
1 Check the media size setup and tray guides for all media
trays.
Does the media size, in use, match the size set for all media
trays?
2 Check the media tray pass through areas for obstructions.
Are the pass through areas in all the media trays free from
obstructions?
2-136
Service Manual
Check
• 242.40 • 243.08
• 245.08 • 245.40
Check
Yes
Replace the Replace the
appropriate connection.
Sensor (pass
through).
"Sensor
Go to
(pass through)
with cable
removal" on
page 4-101.
Go to step 8. Replace the
appropriate pick
arm assembly.
Go to
assembly
removal (T650,
T652, T654)" on
page
Go to step 9. Replace the main
drive motor
assembly.
Go to
motor assembly
removal (T650,
T652, T654)" on
page
Replace the input Problem solved.
option.
• 243.40 244.08
Yes
Go to step 2. Replace the
media, or change
the media size
setup.
Go to step 3. Remove
obstructions.
No
"Pick arm
4-42.
"Main drive
4-24.
No