Lexmark T650n Service Manual page 59

Error
code or Error contents
message
202.86 Sensor (fuser output)
lingering jam.
Destination is
standard bin.
Type 2 fuser
Fuser page count has
exceeded life.
202.87 Sensor (fuser output)
lingering jam.
Destination is output
option.
Type 2 fuser
Fuser page count has
exceeded life.
202.88 Sensor (fuser output)
static jam
and
Sensor (narrow
media) static jam
Type 2 fuser
Fuser page count has
exceeded life.
202.99 Fuser ID chip failure
203.00 Paper jam around
redrive area.
Description/Action
Media reached the sensor
(fuser output) but did not clear
it in the specified time.
and
Media did reach the sensor
(narrow media)
Media reached the sensor
(fuser output) but did not clear
it in the specified time.
and
Media did reach the sensor
(narrow media)
Media remains on the sensor
(fuser output) and the sensor
(narrow media) during the
warm up sequence.
The system does not recognize
the ID chip on the fuser unit.
Page may be jammed in
redrive area.
Possible repair actions
Go to sensor (fuser output)
lingering jam service check.
See "Sensor (fuser output)
lingering jam service check."
on page 2-127.
Go to sensor (fuser output)
lingering jam service check.
See "Sensor (fuser output)
lingering jam service check."
on page 2-127.
1. Go to sensor (fuser output)
static jam service check.
See "Sensor (fuser
output) static jam service
check" on page 2-128.
2. Go to sensor (narrow
media) static jam service
"Sensor
check. See
(narrow media) static jam
service check" on
page 2-130.
Replace the fuser unit
assembly.
"Fuser unit assembly
Go to
removal (T650, T652, T654)"
on page 4-16,
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Go to sensor (fuser output)
service check. See
"Sensor (fuser output)
service check" on
page 2-116.
5. Go to sensor (narrow
media) service check. See
"Sensor (narrow media)
service check" on
page 2-117.
Diagnostic information
4062
2-27