Maintenance And Service; Hako System Maintenance - HAKO Hamster 800 V Operating Instructions Manual

Maintenance and Service

5 Maintenance and
Service
General information
It is essential to pay attention
to the information in Chapter
"Safety Information" before
completing any service or
maintenance work!
By adhering to the maintenance work
recommended by us, you can be sure
that the machine is always ready to be
put into operation.
Maintenance and repair work neces-
sary on a daily and weekly basis can be
carried out by an operator trained to
complete the work, all other Hako sys-
tem maintenance may only be complet-
ed by personnel who are
correspondingly qualified and trained.
Please contact your nearest Hako serv-
ice center or authorized Hako dealer.
Failure to observe this annuls any rights
to claims under the terms of guarantee
in respect of resulting damage or con-
sequential damage.
Always specify the serial number in the
case of inquiries and spare parts or-
ders, refer to section 1.7 - Rating plate.
5.1

Hako system maintenance

The Hako system maintenance:
• ensures that the Hako machine is al-
ways ready for operation (preventive
maintenance),
• minimizes operating costs, mainte-
nance and repair costs,
• ensures the machine has a long
service life.
Hako system maintenance is arranged
into individual modules explaining the
special technical work to be carried out
and prescribes the intervals at which
the work should be performed. Parts to
be replaced for the individual mainte-
nance tasks are defined and provided in
spare parts kits.
Hako system maintenance, cus-
tomer
Work to be carried out by the customer
according to the service and mainte-
nance instructions in the operating
manual (daily and weekly). The driver/
operator receives proper instruction
when the machine is delivered.
Hako one-off system maintenance
After the first four weeks or the first 20
operating hours.
Hako system maintenance I
Six-monthly.
To be completed by skilled personnel
from an authorized Hako service center
according to the machine-specific sys-
tem maintenance with spare parts kit.
Hako system maintenance II
Annually.
To be completed by skilled personnel
from an authorized Hako service center
according to the machine-specific sys-
tem maintenance with spare parts kit -
including safety check.
33