Error Table With Information On Service Display - HAKO Hakomatic B 1100 Service Booklet

10. Error Table With Information
On Service Display
Error code in
the display
1.2.5.2. Thermal switch
Brush motor
1); 2); 3); 4); 5)
1.2.5.5. Thermal switch
3rd Brush motor
(Modul3 Code C)
4) ; 5)
Malfunction Remark
Wire broken since NC activation?
Measure operating current (approx. 12 A
for a motor when operated without in-
creased pressure and on Fama Famin)
Motor overload due to unfavourable floor-
brush-combination and/or permanent
ride with increased ground pressure?
Wire broken since NC activation?
Measure operating current (approx. 12 A
for a motor when operated without in-
creased pressure and on Fama Famin)
Motor overload due to unfavourable floor-
brush-combination and/or permanent
ride with increased ground pressure?
Foil 91