Unpacking; Starting Up; Before Starting Up For The First Time - HAKO Hamster 800 V Operating Instructions Manual

Starting Up

2 Starting Up
2.1 Before starting up for the first
time

2.1.1 Unpacking

Remove the packaging, open the
fastening straps and take the Hako
Hamster 800 V/E from the pallet. For
reasons of packaging, the handlebar of
the Hako Hamster 800 V/E is pivoted
forwards. First of all, pivot the
handlebar to its operating position.
Pivoting the handlebar to its
operating position
1. Loosen the wing bolts (Fig. 4/1) on
the right and left sides of the
handlebar (Fig. 4/2) a few
revolutions until the handlebar
(Fig. 4/2) can be straightened up.
2. Pivot the handlebar (Fig. 4/2)
towards the rear and set it to a height
convenient for the user.
3. Tighten the wing bolts (Fig. 4/1) on
the right and left sides of the
handlebar (Fig. 4/2).
16
Fig. 4
1
2